 Friends links |
|
| Picture |
Heading |
Updated |
 |
Electromagnetic Flowmeter Magflow EMF Insertion Type for Slurry
● Size: DN6~DN2800 ● Medium: Conductive liquid, slurry ● Medium Temperature: E grade∠60℃.H grade∠180℃ ● Conductivity:≥5 u S/cm ● Accuracy:±0.25% . ±0.5% ● Repeatability: ±0.1% . ±0.17% ● Rated Pressure: 0.6, 1.0, 1.6, 2.5, 4.0, 6.4 MPa (or specified by cu |
2017-12-19 |
 |
Open Channel Flowmeter Monitoring Water
Sensor installation Ultrasonic probe was install on the top of the flume, measuring the water level in the flume. Transmitter calculate the open channel instantaneous flow rate according to the water level and flume type and get the value of cumulative fl |
2017-12-18 |
 |
Vortex Flow Meter for Compressed Air and Stream and Natural Gas
TEMGB vortex flowmeter is used for measuring the flow velocity of gases or liquids in pipelines flowing full. The measuring principle is based on the development of a Karman vortex shedding street in the wake of a body built into the pipeline. The periodi |
2017-12-06 |
 |
Rebound Hammer Test Concrete Hardness Tester
HT-225W+ Removable lithium battery typed digital concrete hardness tester. It is a high-tech product especially designed for the needs of in place test for concrete compressive strength, applied to NDE for all kinds of concrete compressive strength compon |
2017-12-03 |
 |
Ultrasonic Wall Thickness Gauges Testing Metal Thickness -TM8812
Specifications 1.Measuring range (metric/imperial): 1.5-200mm,0.06-8inch 2.Operating principle: ULTRASONIC 3.Materials measured: only 11 types of materials, including steel, cast iron, aluminum, red copper, brass, zinc, quartz glass, polyethylene, PVC, gr |
2017-11-27 |
 |
Magnetic Flow Meter Transmitters Remote Converter TEM82E Insertion Magmeter
● Size: DN6~DN2800 ● Medium: Conductive liquid, slurry ● Medium Temperature: E grade∠60℃.H grade∠180℃ ● Conductivity:≥5 u S/cm ● Accuracy:±0.25% . ±0.5% ● Repeatability: ±0.1% . ±0.17% ● Rated Pressure: 0.6, 1.0, 1.6, 2.5, 4.0, 6.4 MPa (or specified by cu |
2017-11-24 |
 |
Non-Contact Ultrasonic Level Meter Measurement Liquid
Introduction of Ultrasonic level meter UTG21-BE is a non-contact one and dose not directly contact liquid, so the fault rate is low . The meter's all input and output lines must be with such protection functions as lightning protection and short circu |
2017-11-23 |
 |
Ultrasonic Level Sensors for Fuel Tank
Introductions UTG21-PS is separate type the sensor PTFE material can be used for a variety of corrosive occasions. Feature 1.Range: 0~15m 2.Blind area: 0.25m~0.5m 3.Ranging accuracy : 0.3% (Standard condition) 4.Ranging resolution: 1mm 5.Pressure: Less th |
2017-11-13 |
|
